Acrosser ANR-IH61N1/A/B User Manual

AMB-IH61N1/A/B Board User Manual 1

2.3 Connector pin define 2.1.1. DDR3 DIMM Connector DIMM1 DIMM2 Standard DDR3 DIMM connector 2.1.2. SATA connector SATA1 SATA2 Standard SAT

CPUFAN1 PIN Signal 1 GND 2 +12V 3 FAN Speed Detect 4 FAN PWM Control 4 Pin, Pitch:2.54mm 2.1.4. LAN1~LAN6, CN_2USB1, LED1~LED3, COM1, RST1, CN

CN_2USB1 Standard USB 3.0 Type-A connector LED3 COM1 Green1: Power ON LED. Green2: HDD LED Yellow1: LAN3&LAN4 Bypass LED. Yellow2: LAN1&LA

2.1.5. CF Socket CF1 CF CARD Socket 2.1.6. ATX Power Connector & VGA Connector ATXPWR1 ATX Power Supply Input FP_VGA1 VGA Wafer Co

2.1.7. Other Connector JP2 (For LAN1/LAN2 Bypass Function Select.). PIN Function 1-2 Forced Normal (Default) 2-3 Controlled By CPLD Open Forced

SPI1 SPI BIOS firmware Update Header PIN Signal PIN Signal1 CS0 2 VCC3 3 MISO 4 HOLD#5 WP# 6 SPICLK7 GND 8 MOSI 9 NC 10 NC CCMOS1

Chapter 3 BIOS Settings This chapter describes the BIOS menu displays and explains how to perform common tasks needed to get the system up and runn

3.1. Main Setup Once you enter the AMI BOS™ CMOS Setup Utility, the Main Menu will appear on the screen. Use the arrow keys to highlight the item a

3.2. Advanced Setup Option Choice Description SATA Configuration N/A SATA Device Options Settings W83627DHG Super IO Configuration N/A Syste

3.2.1. SATA Mode Selection Option Choice Description SATA Mode Selection IDE / AHCI Determines how SATA controller(s) operate. 19

Copyright All Rights Reserved. Manual’s first edition: For the purpose of improving reliability, design and function, the information in this do

3.2.2. W83627DHG Super IO Configuration Option Choice Description COM1 Configuration N/A Set Parameters of Serial Port 1 (COMA) COM2 Configur

3.2.2.1. COM1 Configuration Option Choice Description Change Settings Auto IO=3F8h; IRQ=4 / IO=3F8h; IRQ=3,4,5,6,7,10,11,12 / IO=2F8h; IRQ=3,4

223.2.2.2. COM2 Configuration

Option Choice Description Serial Port Disabled / Enabled Enable or Disable Serial Port (COM) Change Settings Auto IO=3F8h; IRQ=4 / IO=3F8h; IRQ=3,

24 3.2.3. Serial Port Console Redirection Option Choice Description Console Redirection Disabled / Enabled Console Redirection Enable or Disa

3.2.4. Intel(R) 82576 Gigabit Dual Port Network Connection Option Choice Description NIC Configuration N/A Click to configure the network devi

3.2.5. Intel(R) 82574L Gigabit Network Connection Option Choice Description NIC Configuration N/A Click to configure the network device port.

3.3. HW Monitor Setup Option Choice Description SYS temperature N/A This item displays the System Temperature CPU temperature N/A This item

3.4. Chipset Setup Option Choice Description LAN 1 ~ 6 Disabled / Enabled Control the LAN Port Enable / Disable EHCI1 N/A Control the USB EHC

3.4.1. USB Configuration Option Choice Description EHCI1 Disabled / Enabled Control the USB EHCI (USB 2.0) functions. One EHCI controller must alw

Table of Contents Chapter 1 Introduction ... 51.1. ...

3.5. Boot Setup Option Choice Description Setup Prompt Timeout N/A Number of seconds to wait for setup activation key. 65535(0xFFFF) means ind

3.6. Security Setup option Choice Description dministrator Password N/A Set Administrator Password HDD module name N/A Set HDD Password (It

3.6.1. HDD Password Description option Choice Description Set HDD Password N/A Set HDD User Password.*** Advisable to Power Cycle System after

3.7. Save & Exit Setup option Choice Description Save Changes and Exit Pressing <Enter> on this item for save changes and exit. Exit

Save Changes Pressing <Enter> on this item for confirmation : Save configuration Save Changes done so far to any of the setup options.. Discar

Chapter 4 Driver And Utility Installation 4.1. Driver CD Interface Introduction Acrosser provides the a driver CD, which includes the drivers, util

4.1.1 Driver Page This is the Driver Installation Page. 36

Click the icon, all the drivers will be selected. 37

Click the icon, all selected items will be cleared. 38

Click the icon to install the selected drivers. The progress bar shows up. The main window will temporarily disappear. 39

4.1.2 ... 42Utility Page4.1.3 ...

Please click ‘Yes’ to restart the system. 40

Click this icon to browse this CD content. 41

4.1.2 Utility Page Note: For Testing utility running completely, it should be run at test-signed kernel-mode under Operating System x64 edition.

LAN Bypass APIs Test Utility LCM Test Utility 43

Watch Dog Test Utility Sample code 44

4.1.3 Application Page 45

. 4.1.4 Documents Page Double click on one of the items to open the manual. Technical Support Form 46

Chapter 5 Software Installation and Programming Guide 5.1. Introduction 5.1.1 LCD Control Module The LCM (short for LCD Control Module) APIs prov

5.1.4 IH61N Library (Window platform only) The released code for Windows platform includes a folder called ‘AMB-IH61N1’. In this folder, there are h

5.2.2 Watchdog On Linux platform: 1. Libw83627.h This file includes the declarations of the APIs and macro definitions. 2. maintest.c The source c

Chapter 1 Introduction AMB-IH61N1 is designed for rack-mounted platform for networking appliance, e.g. VPN, SSL, UTM or firewall. With 3rd Generatio

5.3. API List and Descriptions 5.3.1 Type Definitions Typedef char i8; Typedef unsigned char u8; Typedef short i16; Typedef

4. i32 displayLcm( bool mode ) Description: Show the text on the LCM screen or eliminate the text on the LCM screen. The content of the text is not

5.3.3 Watchdog 1. Syntax: Void wdt_start(int, int) Description: This function read the value of the watchdog time counter and return it to the calle

5. void forceBypass(void) Force the port to become bypass state. 6. void setWdt4(void) Set the watchdog timer to 4 seconds. 7. void setWdt8(voi

FAQ There are 2 kinds of SATA modes --- AHCI & legacy IDE mode. When you use the Linux, We strongly suggest to use AHCI mode. For legacy IDE mode

 (reference only)  Ensure the Network Connections/Local Area Connection is enabled (right click and choose “Enable”). If the problem persists, p

Appendix: Technical Support Form We deeply appreciate you purchase Acrosser products. Please find “tech_form.doc” file in our utility CD. If yo

57 Acrosser Headquarters 新北市三重區重新路五段609巷12號10樓 10F., No.12, Lane 609, Sec. 5, Chongsin Rd., Sanchong District, New Taipei City 241, Taiwan, R.O.C. T

1.2. Package Contents 　 Check if the following items are included in the package. Model Name Part Lists QTY AMB-IH61N1/A/B Board 1 Quick manual

1.3. Block Diagram 7

Chapter 2 H/W Information This chapter describes the installation of AMB-IH61N1/A/B. At first, it shows the Function diagram and the layout of AMB-IH

2.2 Locations of IO ports & Jumper settings definition 25 265824 3 4 23 34 671233 31 32 2728293018 19 17161522 21 20 14129 1311 10 9