Acrosser AR-V5430FL User Manual

Revision: 1.0 1 Revision Description Date 1.0 Release 2009/07/24 AR-V5430FL Installation Guide

Revision: 1.0 10 7. Assemble the HDD module and HDD bracket by 4 screws. Screws up

Revision: 1.0 118. Place HDD module back into the case. 9. Fix HDD module to the chassis by four screws. The installing of bra

Revision: 1.0 1210. Plug SATA cable and power cable into mainboard. 11. Slide the top cover into the bottom chassis. SATA Connecter SATA Power

Revision: 1.0 13 12. Finish the HDD installation after fastening the screw. Fasten the screw PushPush

Revision: 1.0 142.2 Accessory (SO-DIMM, CF card, SIM Card, Outline bracket) Installation z Install SO-DIMM 1. Remove the extending door by u

Revision: 1.0 15z Install CF Card 1. Remove the extending CF’s bracket by unfastening the screws. 2. Install CF card into bracket. 3. Insta

Revision: 1.0 16 z Install SIM Card 1. Install SIM card into the SIM socket.

Revision: 1.0 17z Install Outline Bracket 1. Install fasteners with case by 4 screws. 2. Install fasteners’ another side with Outline bracket b

Revision: 1.0 182.3 GPS/GPRS/WiFi Modules Installation 1. Unfasten 2 screws to release GPS/GPRS brackets. 2. After GPS/GPRS bracket release

Revision: 1.0 193. Install GPS/GPRS modules into chassis by fastening 2 screws as step 1. 4. Unfasten 2 screws to release WiFi bracket. 5. Af

Revision: 1.0 2Contents 1 Introduction to AR-V5430FL……………………………………………………... 3 1.1 Specifications..………………………………………………….………….…. 3 1.2 Packing Li

Revision: 1.0 20 3 Appendix Please don’t change CPU by yourself. Any disassembly and assembly behavior for the CPU thermal module will cause

Revision: 1.0 31 Introduction to AR-V5430FL AR-V5430FL is a Fan-less system product mainly for vehicles industry PC applications. With powerful

Revision: 1.0 4System Dissection (1) Dimensions (2) Front Panel “I/O” GPIO by DB15 Power-on status Speaker/Mic/Remote CO

Revision: 1.0 5(3) System Configuration 1 7 6 2854 10123119 13

Revision: 1.0 6 Item Description Quantity1 Upper Case 1 2 Bottom Case 1 3 Thermal Module 1 4 Mounting Bracket 2 5 CF Card Bracket 1 6 G

Revision: 1.0 72 Procedure of Assembly/Disassembly 2.1 2.5” Hard Disk Installation The following instructions will guide you to install HDD s

Revision: 1.0 83. Remove top cover by below photo direction. Remove Push Push

Revision: 1.0 9 4. Insert the rubbers into the HDD bracket. 5. Place HDD body into HDD bracket and assemble HDD and bracket by 4 screws. 6.