Acrosser AR-ES5430FL User Manual

Revision :1.2 1 Revision Description Date 1.0 Release 2008/01/29 1.1 Add new system dimension 2009/06/16 1.2 Modify Syst

Revision :1.2 102-2 Installing CF card The following are procedure for install CF card 1. Remove screws (2pcs) in CF card bracket 2. Install C

Revision :1.2 11 2-3 Installing SO-DIMM The following are procedure for install SO-DIMM 1. Remove HDD out from the system 2. Install the SO-DI

Revision :1.2 123. Re-Install HDD device 4. Lock the bottom case Door screws 2-4 Installing the 2.5”SATA Hard Disk Drive(HDD)(Option) The fol

Revision :1.2 132. Lock HDD and Bracket together via screws (4pcs) 3. Plug the HDD cable into the power and signal header connectors in main

Revision :1.2 144. Remove right side door screws (2pcs) in system bottom case 5. Route the HDD cable through the main board 6. Lock right

Revision :1.2 2Contents 1 Introduction to AR-ES5430FL……………………………………….. 3 1-1 Description……………………………………………………….… 3 1-2 Packing List……………………………

Revision :1.2 31. Introduction to AR-ES5430FL AR-ES5430FL is a system product mainly for ticket control, navigation, advertising, fleet manag

Revision :1.2 41.3 Main system (1) Dimension

Revision :1.2 5(2) System Configure

Revision :1.2 62. Procedure of Assembly/Disassembly 2-1 Installing the 2.5” Hard Disk Drive (HDD) The following are procedure for install 2.5”H

Revision :1.2 72. Lock HDD and Bracket together via screws (4pcs) 3. Plug the HDD cable into the 44-pin header connectors in main board

Revision :1.2 84. Remove right side door screws (2pcs) in system bottom case 5. Route the HDD cable through the main board 6. Lock right

Revision :1.2 9 7. Lock HDD bracket to the top case by four screws 8. Insert HDD cable into the HDD module 9. Lock the door screws in system