Acrosser AR-ES5630FL User Manual

Revision: 1.1 1 Revision Description Date 1.0 Release 2008/07/04 1.1 Modify 1-3 Main system 2009/06/16 1.11 Change new RS-

Revision: 1.1 102-2 Installing CF card The following are step-by-step for installing CF card 1. Remove screws (2pcs) out from the CF card bracke

Revision: 1.1 11 2-3 Installing SO-DIMM The following are step-by-step for installing SO-DIMM 1. Remove the HDD holder out from the system 2. R

Revision: 1.1 122-4 Change from RS232 to RS422/485 by using Y-cable 1. Remove the 4 screws from top cover. 2. Slide the top cover in the

Revision: 1.1 13 4.Change by this terminal to connect with the RS422/RS485 pin header of main board.(Appendix A) 6. Slide the top cover and c

Revision: 1.1 14 6. Tighten the original screws.

Revision: 1.1 15APPENDIX A NO.23 COM2 => RS232 (PIN1, Please refer to the AR-B5630 User’s Manual) NO.30 => RS422/485(P

Revision: 1.1 2Contents 1 Introduction to AR-ES5630FL………………………………………..3 1-1 Description…………………………………………………………3 1-2 Packing List………………………………………

Revision: 1.1 31. Introduction to AR-ES5630FL AR-ES5630FL is a system product mainly for ticket control, navigation, advertising, fleet manage

Revision: 1.1 41.3 Main system (1) Dimension (2) System Configure

Revision: 1.1 5MOUNTING_BRACKETBOTTOM-CASEFRONT-CASETOP_COVERBASE_COVERHDD_BRACKETCF_BRACKETHDD_WASHERHDD_SCREWPCB_BRACKETHEAT_SINKAR-B5630_V1.0A

Revision: 1.1 62. Procedure of Assembly/Disassembly 2-1 Installing the 2.5” Hard Disk Drive (HDD) The following are step-by-step for installin

Revision: 1.1 72. Lock HDD and the HDD holder together via screws (4pcs) 3. Plug the HDD cable into the 44-pin header connectors of the main b

Revision: 1.1 84. Remove right side door screws (2pcs) out from the system bottom case 5. Route the HDD cable through and pass the main boar

Revision: 1.1 9 7. Lock the HDD holder to the top case by four screws 8. Insert HDD cable into the HDD module 9. Lock the door screws in syst